Parts can be placed in an array to quickly fill a sheet with minimum effort. They can be flipped and rotated to make most efficient use of the material. To prevent corner rounding, the corners can be looped. The holes would also be cut first. As the small holes are too small to fit a full sized lead in and lead out, the leads are reduced in size to fit. SheetCam automatically works out the holes are inside so it reverses the cut direction for these features. SheetCam gives you many options to optimise cutting. Once you have defined you tool you can set up the cut. This increases consumable life and reduces faulty cuts due to blocked or obstructed nozzles Instead of plunging straight in, the cutter torch can ramp in, reducing the amount of material blown back into the torch. Automatic cut ordering to ensure that inside contours are always cut before outside contours.Draw your part the size you want and let SheetCam work out where to run the torch.

You can define as many tools as you like for different materials etc.

The tool definition allows you define all of the important parameters for cutting.

SheetCam combined witn Mach3 and a torch height controller from CandCNC for an unbeatable plasma cutting solution. This is useful for machines running Mach3for instance. SheetCam has many useful features for plasma, laser, waterjet and oxy-fuel cutting.įor machines that have full control over the Z axis you can program the pierce height and cut height directly. : Plasma, laser, waterjet and oxy fuel cutting.

Sheetcam mach3